Electric Bricking Screw Press China introduce features of screw presses

Electric Bricking Screw Press China tells you that screw presses are mainly used for processing various high, medium, and low-grade refractory materials. Electric Bricking Screw Press China tells you that this press can also be applied to the processing and forming of various metal material products (cold and hot forging, cold forging of thin forgings, casting and forging).

Electric Bricking Screw Press China tells you that the lower part of the general screw press is equipped with a forging ejection device. The screw press has the functions of various forging machines such as die forging hammer and mechanical press, and has strong versatility. It can be used for die forging, punching, deep drawing, and other processes. In addition, the screw press, especially the friction press function edits broadcast
Electric Bricking Screw Press China tells you that the screw press has no fixed bottom dead center, and for larger die forgings, it can be formed by multiple strikes, and can perform single, continuous, and inching. The impact force is related to the deformation of the workpiece. The impact force is small when the deformation is large, and the impact force is large when the deformation is small (such as cold shock). In these respects, it is similar to a forging hammer.
Electric Bricking Screw Press China tells you that its slider speed is low (about 0.5 m/s, only 1/10 of that of the forging hammer), the striking force is closed through the frame, so the work is stable and the vibration is much smaller than that of the forging hammer. No big foundation is needed. The screw press is equipped with a slip insurance mechanism, which limits the maximum striking force to within 2 times the nominal pressure to protect the safety of the equipment.