Product center

JH58Z Series Electric Bricking Screw Press

FORGING MACHINERY PRODUCTION SERVICE PROVIDER

Product Summary:

Technical characteristics of the Electric Bricking Screw Press: The shaping product boasts high quality, excellent consistency and a high pass rate. You can set up the striking force digitally and programmatically, simulating manual operation, first light hitting, then heavy hitting;

TEl：

0086-532-82296118

Technical characteristics of Electric Bricking Screw Press:
　　1. The shaping product boasts high quality, excellent consistency, and a high pass rate. You can set up the striking force digitally and programmatically, simulating manual operation, first light hitting, then heavy hitting;
　　2. Accurate energy control and accurate strike force. The switched reluctance motor speed regulation is accurate with less error, and the input energy control of the screw press is accurate;
　　3. The transmission chain is short, the structure is simple, the wearing and consumable parts are few, the maintenance is convenient and the cost is low. Without two friction disks, the motor directly drives the flywheel to move forward and reverse, driving the slider to move up and down, and generating a striking force.
　　4. Boasting a High degree of automation, can reduce the number of corporate servants. The program controls the molding process with the push-button operation, which reduces the worker labor intensity and the number of servants;
　　5. High efficiency and energy saving. When the motor is started during the process of blow molding, feeding and output, and mold cleaning, the motor is stopped, which saves 30%-50%of energy compared with the traditional friction press;
　　6. High safety with braking sensitivity and reliability. The emergency stop button is set to ensure the slider can stop at any position;
　　7. High reliability, safety and durability. Switched reluctance motors have the characteristic of soft starting, with low current and large torque, which reduces the impact on the power grid; the motor rotor structure is solid and can withstand the impact force load, and the stalled and missing phases will not burning-out the motor and controller.

Main Technical Parameters		Unit	JH58Z-400A	JH58Z-630A	JH58Z-1000A	JH58Z-1600A
Nominal Force		kN	4000	6300	10000	16000
Maximum Force		kN	8000	12500	20000	32000
Slider Stroke		mm	500	550	650	650
Number of Strokes		Time/Min	24	20	16	14
Maximum Blow Speed		M/S	0.7	0.7	0.7	0.65
Die Height		mm	480	600	650	800
Guide Spacing		mm	640	727	910	940
Worktable Dimension	Front / Back	mm	820	820	1200	1250
Worktable Dimension	Left / Right	mm	730	920	1000	1100
Bottom Dimension of Sliding Block	Front / Back	mm	760	920	1000	1250
Bottom Dimension of Sliding Block	Left / Right	mm	680	690	900	930
Thickness of Backing Board		mm	120	180	180	200
Bottom Knockout	Form	mm	Rigid	Rigid	Rigid	Rigid
Bottom Knockout	Rigid Stroke	mm	300-400	300-400	350-400	350-400
Motor Power		kW	2x30	2x55	2x75	2x132
Overall Dimension	Front / Back	mm	2000	2600	3000	3700
	Left / Right	mm	3400	3500	5200	6600
	Height	mm	4600	5650	6700	7600
Height Above Bottom		mm	4300	5150	5700	7000
Equipment Weight		kg	27000	46000	75000	135000